FSF High Speed Disperser

Products Details

FSF High Speed Disperser 01 The high-speed disperser surface is specially treated, and the appearance is novel and beautiful. With its stable performance and mature technology, it is favored by consumers as a widely-used production equipment. It can dissolve, disperse, mix and emulsify different viscosity materials through the highspeed rotation of the dispersion disc. FS30 Series Configuration: 1.Drive Motor: Siemens / ABB / DZ / explosion-proof type, etc. 2.Motor Power: 0.75KW-110KW 3.Drive Power: 380V or 415V/ 50Hz or60Hz 4.Speed Control Mode: inverter speed / electronic speed / PLC system 5.Speed Range: 0〜1000/0〜1450/0〜2900RPM 6.Processing Range: 2(^-10CBM per batch 7.Sealing Type: single-end / double-end mechanical seal, a variety of seal types can be selected, preventing contamination of materials 8.Work Type: High-speed shearing and paddle dispersing strong mixing, high-speed dispersion, effective mixing of suspension and solid-liquid mixture, slurry, etc. 9.Contact Material: SUS 304/SUS 316L/2205/2507 and other special materials 10.Bracket Material: Q235-A/304, etc.(all stainless steel is fully comply with GMP standards) 11.Electric Control: Ordinary Switch Lifting and Dispersing Control System. PLC Control System 12.Auxiliary Equipment: pneumatic lifting system, automatic lifting system, manual lifting device, holding barrel device, clip barrel device, etc. 13.Auxiliary Accessories: cylinder, reactor, vacuum, pressure, heating, cooling, temperature control devices, etc. Product Parameters

FSF High Speed Disperser  002

Drive Motor: AC motor(explosion-proof/non-explosion-proof) Motor Power: 2.2KW- 100KW Drive Power: 380V/50HZ Speed: 0- 1460RPM Capacity: 10 - 3000L Contact Material: SUS304 stainless steel Bracket Material: Q235-A Atmospheric pressure design, no mechanical seal; Installed in an atmospheric reactor. 30L-10.000L processing capacity to meet different production needs. It can be used with the reactor and the length can be customized ;

FSF High Speed Disperser 02

*The above information is for reference only and can be customized according to customer requirements. *This equipment can be customized according to customer’s materials to meet the needs of the process, such as requiring greater viscosity, enhanced homogenization function, heat sensitive materials and other requirements. Product Structure High-speed disperser can produce a strong power of shear, impact and friction between the material and the dispersion disc through the high-speed rotation of the sawtooth dispersion disc, achieving the purpose of rapid dispersion, dissolution and uniform mixing. This equipment is featured by compact structure, stable performance, accurate frequency conversion, low energy consumption, stable hydraulic lifting performance, easy operation, easy disassembly of dispersion disc, and convenient cleaning. Therefore it is widely used for mixing and dispersing in coatings, inks, adhesives, emulsions, fine chemical materials, etc.

FSF High Speed Disperser 03

Working Principle •Under the effect of centrifugal force generated by the rotor rotating at a high speed, the material in the drawing is sucked into the working chamber from the upper and lower feeding areas of the working chamber at the same time. •The strong centrifugal force throws the material from the radial direction into the narrow and precise gap between the stator and the rotor. Under the action of centrifugal extrusion and impact, the material is initially dispersed and emulsified. •There is a line speed at the outer end of the high-speed rotor, which at least 15m/s and up to 40m/s. forming a strong mechanical and hydraulic shear, liquid friction and impact tear, so that the material is fully dispersed, emulsified, homogenized and crushed, finally it is ejected through the stator slot. •The material is continuously ejected from the radial direction at a high speed, and the flow direction is changed under the resistance of the material itself and the container wall. At the same time, under the effect of the upper and lower axial suction generated in the rotor area, two turbulence from the upper and lower are strongly formed. After several cycles, the material is finally completed of processes of dispersion, emulsification, and homogenization. Product  Showcase

FSF High Speed Disperser 04

FSF High Speed Disperser 06


FSF High Speed Disperser 08

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours